HITACHI Type Copper Y Joint
HITACHI type copper Y joint with 90° bend design
Therefore, you can use it directly without bending it
HITACHI type copper Y joint has higher sales
This is due to the good versatility of Hitachi diverter tubes
You can choose the right Hitachi diverter in the following parameters.
- 52SN-162SN
- 242SN-302SN
- M-20SNQ/M-30SNQ
| Model | Item | A | B | C |
| E-52SN | Gas line | 15.88 | 15.88/12.7 | 15.88/12.7 |
| Liquid line | 9.52 | 9.52/6.35 | 9.52/6.35 | |
| E-102SN | Gas line | 22.22/19.05/15.88 | 22.22/19.05/15.88/12.7 | 15.88/12.7 |
| Liquid line | 9.52 | 9.52/6.35 | 9.52/6.35 | |
| E-162SN | Gas line | 25.4/28.58 | 25.4/28.58 | 22.22/19.05/15.88/12.7 |
| Liquid line | 12.7 | 12.7/9.52/6.35 | 12.7/9.52/6.35 | |
| Reducer | OD25.4→ID22.22/19.05/15.88/12.7 |
| Model | Item | A | B | C |
| E-242SN | Gas line | 25.4/28.58 | 25.4/28.58 | 22.22/19.05/15.88/12.7 |
| Liquid line | 15.88 | 15.88/12.7/9.52 | 12.7/9.52/6.35 | |
| Reducer | OD25.4→ID22.22/19.05/15.88/12.7 | |||
| E-302SN | Gas line | 31.8/38.1 | 31.8/38.1 | 28.58/25.4/22.22 |
| Liquid line | 22.22/19.05 | 19.05/15.88/12.7/9.52 | 15.88/12.7/9.52/6.35 | |
| Reducer1 | OD31.8→ID28.58/25.4/22.22 | |||
| Reducer2 | OD22.22→ID19.05/15.88/12.7 | |||
| Reducer3 | OD38.1→ID34.9 |
| Model | Item | A | B | C |
| M-20SNQ | Gas line | 25.4/28.58 | 25.4/28.58 | 22.22/19.05/15.88/12.7 |
| Liquid line | 15.88 | 15.88/12.7/9.52 | 12.7/9.52/6.35 | |
| Reducer | OD25.4→ID22.22/19.05/15.88/12.7 | |||
| M-30SNQ | Gas line | 31.8/38.1 | 31.8/38.1 | 28.58/25.4/22.22 |
| Liquid line | 22.22/19.05 | 19.05/15.88/12.7/9.52 | 15.88/12.7/9.52/6.35 | |
| Reducer1 | OD31.8→ID28.58/25.4/22.22 | |||
| Reducer2 | OD22.22→ID19.05/15.88/12.7 | |||
| Reducer3 | OD38.1→ID34.9 |
